logo_fox

Our exclusive supplier of level gauges and sensors is Fox s.r.l.

 

 

LV

LV Serie

data sheet: Fox LV

 

 

 

 

“LV” sight level gauges allow the sight reading of the fluid level through a transparent tube connected to the tank. O-Ring are located in all joining points to allow a perfect sealing even when the unit is mounted on a non perfectly flat surface.
The tube protection can be orientated on a 180° angle and the mobile heads permit to recuperate drilling mistakes on fixation holes centres up to +4mm. Besides mineral oils they can be used with other not aggressive fluids.
They can be supplied with thermometer fit inside the sight tube (LVT series) or with electric contact when reaching minimum oil level (LVSE series). They can be supplied with 2,5 meters of maximum length

 

 

 

SCL3_sc

 

SCL3 Serie

data sheet: SCL3

 

 

 

The “SCL3” conductive level sensors with horizontal operation commutes an exchange contact when the fluid close the contact between the emitter and the receiver situated in the centre of the thread connection. They are suitable to signal the minimum and maximum level of a conducible fluid in the tank, two led situated in the transparent connector signal the status of the contacts.

 

 

 

 

LG1_1

 

LG1 – LG2 Serie

data sheet: Fox LG1_2

 

 

 

 

“LG1” vertical operation level gauges series is suitable to signal the minimum or maximum level of a fluid in the tank. The fixing flange allows three fixing typologies in only one execution. This instrument has the electric exchange contacts in the standard execution and simple electric contact in the execution with an incorporate thermostat. “LG1R” series is the execution with the possibility to regulate the height of the float, while the “LG2” allows to cut the rod and choose the distance of the float. “LG1” and “LG1R” series are also available with the electric contact for the control of the temperature.

 

 

 

 

LVO-LVI

 

  LVO – LVI

data sheet: Fox LVO-LVI

 

 

 

“LVO” level gauge series, at horizontal operation, is likely to indicate the minimum or maximum amount of fluid in a tank. The type of contact allows for a simple NC or NO signal through the positioning of the same level switch (see images). The “LVI” series allow, with a vertical assembly, to obtain an exchange contact signal with a compact and economically competitive execution. The hydraulic connection is made in a single execution with male thread and nut included.

 

 

 

 

LGV_doppio_1

 

LGV Serie

data sheet: Fox LGV

 

 

 

 

“LGV” vertical operation level gauges series is suitable to signal the minimum or maximum level of a fluid in the tank. The tool allows to continuously display the level of a tank and the switching of two electrical contacts to the achievement of two different values of the level set at will by means of the adjustment buttons placed on the display. The measured values ranging from 50 to 1500 mm.

 

 

 

LG4_doppio_2

 

LG4 Serie

data sheet: Fox LG4

 

 

 

The level switch series “LG4” in vertical operation emit a signal current or voltage proportional to the minimum or maximum level of a fluid in a tank. The measured values ranging from 50 to 1500 mm.